Dynamo Pump Replacement Parts

Replacement Parts


View Larger Image
DYNAMO PUMPS MOTORS 
Item No. Part No. Description
1 356495S
1 HP, 1-1/2 SPL, 115 Volt, w/o switch
1 356469S
1-1/2 HP, 2 SPL, 115/230 Volt, w/o switch 1
1 356551S
1 HP, 1-1/2 SPL, 115 Volt, w/switch
1 356497S
3/4 HP, 1SPL, 115 Volt, w/o switch
1 356436
3/4 HP, CSA 60 Hz, 115 Volt w/o switch 2
1 356437S
1 HP, CSA, 115 Volt, w/o switch
1 356597S
3/4 HP, 1SPL, 115 Volt, w/switch
1 356595S
1 HP, 1-1/2 SPL, 115 Volt, w/switch
1 356440S
1-1/2 HP, CSA 60 HZ, 115 Volt, w/o switch 2
2 354632
Diffuser, 3/4 HP bracket
2 354633
Diffuser, 1, 1-1/2 HP bracket
3 354542
Nut, 10-24 SS, 6 req.
4 354634
O-ring, 3/16 in. bracket diffuser
5 354545S
Seal 5/8 in. mechanical
6 353002
Impeller, 1/2 HP
6 354552
Impeller
6 355122
Impeller, 1 HP
7 354630
Housing, body
8 354541
Screw #10-24 hex pan head, 6 req. 1-1/2 in. slotted
9 154481
Drain Plug 1/4 in., 2 req.
10 273062
O-ring
11 354530
Pot
12 354548
Basket w/handle
13 354533
O-ring, lid
14 354531
Lid, universal
15 354103
Pot assembly
16 354621
Body, motor enclosure
17 354881
Cap, motor enclosure
18 154716
Screw, No.10 self tapping
19 155371
Cord, 25 ft.
20 41412700
Bushing connector
21 155187
Switch toggle double insulated on/off (CSA)
21A 356456
Switch, three position toggle (Hi/Low/Off)
22 155193
Wire, 6 in. jumper
23 354658
Insulation, foam strip adhesive backing
24 350024
Locknut, steel 1-1/2 in.
NOT SHOWN 
Item No. Part No. Description
352256
Nut, 1-1/2 in. quick connect, 2 req.
354571
O-ring 2 req.
79137800
3 ft. cord standard
352245
Strain relief bushing for cords
155295
Photo sensor add-on, used on 3/4 & 1 HP only
350444
Motor switch assembly, on/off
153263
Base CSA 4 in.
155234
3 ft. cord TW


1: Not available on Dynamo pump.
2: Without rigid base.