View Larger Image |
Legend 4-Wheel Replacement Parts
Replacement Parts
| LEGEND 4 WHEEL REPLACEMENT PARTS | ||
| Item No. | Part No. | Description |
| 1 | Top Cover |
|
| 2 | Main Frame |
|
| 3 | Bottom Cover - White |
|
| 4* | Feed Mast w/O-Ring - White |
|
| 5 | Turbine Shaft - Complete |
|
| 6 | Turbine Spacers - Set, 1 long, 1 short |
|
| 7 | Turbine Bearings - 2-PK |
|
| 8 | Turbine Shaft Shield - White |
|
| 9 | Turbine Cover w/Elbow - White |
|
| 11 | Hose - 7-3/4 in. length - White |
|
| 12* | Sweep Hose - Complete |
|
| 13 | Wear Ring |
|
| 14 | Sweep Hose - Jet w/Collar - White |
|
| 15* | Sweep Hose - Adjustment Screw - White 1 |
|
| 15 | Sweep Hose - Adjustment Screw - SS 2 |
|
| 16 | Ballast Float - White |
|
| 17 | Hose Sleeve |
|
| 18 | Debris Bag with Snaplock |
|
| 18* | Coarse Mesh Bag |
|
| 18* | Fine Mesh Bag - White Collar |
|
| 20 | Debris Valve |
|
| 21 | O-Ring for Feed Mast |
|
| 22 | O-Ring for Thrust Jet |
|
| 23 | Thrust Jet - Light Gray |
|
| 24 | Thrust Jet Plate - White |
|
| 25 | Axle |
|
| 26 | Axle Plate |
|
| 27 | Axel - Lock Washer |
|
| 28* | Wheel - Large |
|
| 29* | Bearings - 2-PK |
|
| 30* | Back-Up Valve - White |
|
| 31* | Wheel Screw - Plastic - White |
|
| 32* | Wheel - Rubber Tire |
|
| 32 | Wheel - Rubber Tire 3 |
|
| 33 | Hose Clamp |
|
| 34 | Screw |
|
| 35* | Feed Hose - clear soft - 7’-8” |
|
| 36* | Hose Float |
|
| 37* | Feet Hose - White - 11’-2” |
|
| 38 | Swivel - Feed Hose |
|
| 39 | Adapter Hose - White - 8-1/2 in. |
|
| 40* | Mender Nut |
|
| 41 | Wall Fitting - Complete |
|
| 41 | Pressure Relief Valve - White |
|
| 42 | Screen For Wall Fitting |
|
| 43 | Quick Disconnect Adapter |
|
| 44 | Wheel - Plastic Washer |
|
| 46* | Gears - for Back-Up Valve |
|
| 47 | Thrust Jet Repair Kit includes: (White) E18, EC130, EC135 |
|
| 48 | Screw |
|
| 49 | Axle Bolt |
|
| 50 | Snap Fit Vac Tube Posts - White |
|
| 51 | Nut & Bolt - Feed Mast to Vac Tube |
|
| 52 | Venturi Jet - White |
|
| 53 | Screw - Cover To Frame |
|
| BACK-UP VALVE PARTS - E10 (#30 on schematic) | ||
| Item No. | Part No. | Description |
Housing Body |
||
Back Up Valve - Top Cover |
||
O-Ring |
||
O-Ring for Gear Assembly |
||
Screw for Housing Body - 6-PK |
||
Gears - for Back-Up Valve |
||
| WALL FITTING PARTS - EW22 (#41 on schematic)* | ||
| Item No. | Part No. | Description |
O-Ring For Wall Fitting |
||
Pressure Relief Valve - White |
||
Screen For Wall Fitting |
||
Quick Disconnect Adapter |
||
| LEGEND TUNE-UP KIT - LL205N* | ||
| Item No. | Part No. | Description |
Fine Mesh Bag - White Collar |
||
Debris Valve |
||
Turbine Bearings - 2-PK |
||
Bearings - 2-PK |
||
Turbine Shaft - Complete |
||
Sweep Hose - Complete |
||
Wheel - Large |
||
Wheel - Rubber Tire |
||
| LEGEND OVERHAUL KIT - LL206N* | ||
| Item No. | Part No. | Description |
Legend Overhaul Kit |
||
Fine Mesh Bag - White Collar |
||
Turbine Shaft - Complete |
||
Axle |
||
Debris Valve |
||
Sweep Hose - Complete |
||
Turbine Bearings - 2-PK |
||
Wheel - Large |
||
Wheel - Rubber Tire |
||
Bearings - 2-PK |
||
Ballast Float - White |
||
| LEGEND HOSE KIT - LL209* | ||
| Item No. | Part No. | Description |
Legend Hose Kit |
||
White Feed Hose 10 in. |
||
Feed Hose - Clear soft 10 in. |
||
Hose Float |
||
Swivel |
||
Back-Up Valve - White |
||
Adapter Hose - White - 8-1/2 in. |
||
Mender Nut |
||
Wall Fitting - Complete |
||
Wear Ring |
||
| NOT SHOWN | ||
| Item No. | Part No. | Description |
Snap Fittings |
||
Sweep Hose Scrubber |
||
Pressure Stick w/o Gauge |
||
Pressure Gauge for JVP8 |
||
Step Deflector |
||
*: Recommended for stock
1: For use on units manufactured before 8-01-05.
2: For use on units manufactured after 8-01-05.