View Larger Image |
Kreepy Krauly Legend II Replacement Parts
Replacement Parts
| LEGEND II - LX 2000 REPLACEMENT PARTS | ||
| Item No. | Part No. | Description |
| 1 | Top Cover - Gray Main Frame (Legend II only) Bottom Cover |
|
| 1 | Top Cover - Gray 3 |
|
| 2 | Main Frame |
|
| 3 | Bottom Cover - White |
|
| 3 | Bottom Cover 3 |
|
| 4* | Feed Mast w/0-Ring & Swivel |
|
| 5 | Turbine Shaft - Complete |
|
| 6 | Turbine Spacers - Set, 1 long, 1 short |
|
| 7 | Turbine Bearings - 2-PK |
|
| 8 | Turbine Shaft Shield - White |
|
| 9 | Turbine Cover w/Elbows |
|
| 11 | Hose - 7-3/4 in. length - White |
|
| 12 | Sweep Hose - Complete |
|
| 13 | Wear Ring |
|
| 14 | Sweep Hose - Jet w/Collar - White |
|
| 15 | Sweep Hose - Adjustment Screw - White 1 |
|
| 15 | Sweep Hose - Adjustment Screw - SS 2 |
|
| 16 | Ballast Float - White |
|
| 17 | Hose Sleeve |
|
| 18 | Coarse Mesh Bag |
|
| 18 | Fine Mesh Bag - White Collar |
|
| 18 | Debris Bag with Snaplock |
|
| 20 | Debris Valve |
|
| 21 | O-Ring for Feed Mast |
|
| 22 | O-Ring for Thrust Jet |
|
| 23 | Thrust Jet - Light Gray |
|
| 24 | Thrust Jet Plate - White |
|
| 25 | Axle |
|
| 26 | Axle Plate |
|
| 27 | Axel - Lock Washer |
|
| 28* | Wheel - Large |
|
| 29 | Bearings - 2-PK |
|
| 30 | Wheel Screw - Plastic - White |
|
| 31* | Tire - Legend II |
|
| 32 | Wheel - Rubber Tire 3 |
|
| 32 | Hose Clamp |
|
| 33 | Screw |
|
| 34 | Screw |
|
| 35 | Wheel - Plastic Washer |
|
| 35 | Wheel 3 |
|
| 37 | Thrust Jet Repair Kit includes: (White) E18, EC130, EC135 |
|
| 38 | Screw |
|
| 39 | Axle Bolt |
|
| 40 | Snap Fit Vac Tube Posts - White |
|
| 41 | Nut & Bolt - Feed Mast to Vac Tube |
|
| 42 | Venturi Jet |
|
| 43 | Screw - Cover To Frame |
|
| H2* | Back Up Valve - Low Pressure |
|
| H2 | Back Up Valve - Housing |
|
| H2 | Back Up Valve - Top Cover |
|
| inside H2 | O-Ring |
|
| inside H2 | O-Ring for Gear Assembly |
|
| H2 | Screw for Housing Body - 6-PK |
|
| inside H2* | Back Up Valve - Gear Assembly |
|
| H3 | Feed Hose Float |
|
| H5 | Feed Hose - 6 ft. Section |
|
| H4 | Feed Hose - 2 ft. Section |
|
| H6 | Feed Hose Mender w/O-Ring #0252 |
|
| H7* | Feed Hose Swivel |
|
| H8* | Wall Fitting - Complete |
|
| H8 | O-Ring For Wall Fitting |
|
| H8 | Quick Disconnect Adapter |
|
| insideH8 | Screen For Wall Fitting |
|
| insideH8 | Wall Fitting - Pressure Relief Valve |
|
| H9 | Pressure Tester |
|
| LEGEND II HOSE KIT - LX209* | ||
| Item No. | Part No. | Description |
Kit includes |
||
Pressure Tester |
||
Feed Hose - 2 ft. Section |
||
Feed Hose Mender w/O-Ring #0252 |
||
Feed Hose Swivel |
||
Feed Hose - 6 ft. Section |
||
Feed Hose Float |
||
Back Up Valve - Low Pressure |
||
Wall Fitting - Complete |
||
| LEGEND II TUNE-UP KIT - LX205* | ||
| Item No. | Part No. | Description |
Kit includes |
||
Fine Mesh Bag - White Collar |
||
Debris Valve |
||
Turbine Bearings - 2-PK |
||
Bearings - 2-PK |
||
Turbine Shaft - Complete |
||
Sweep Hose - Complete |
||
Wheel - Large |
||
| NOT SHOWN | ||
| Item No. | Part No. | Description |
Sweep Hose Scrubber |
||
Pressure Stick w/o Gauge |
||
Pressure Gauge for JVP8 |
||
Hub Cap 3 |
||
*: Recommended for stock
1: For use on units manufactured before 8-01-05.
2: For use on units manufactured after 8-01-05.
3: For use with models LL505G and LX5000G.