View Larger Image |
Dyna-Pro / Dyna-Pro E Pumps Replacement Parts
Replacement Parts
| DYNA-PRO REPLACEMENT PARTS | ||
| Item No. | Part No. | Description |
| 2 | Screw |
|
| 3 | Bonding Lug |
|
| 4 | Water Slinger |
|
| 5 | Seal Plate |
|
| 6 | Seal Plate Cord Ring |
|
| 7 | Shaft Seal |
|
| 8 | Impeller, 1/2 HP (Models MPEA6D-204L, MPE6C-207L, MPRA6D-204L) |
|
| 8 | Impeller, 1 HP (Models MPEA6E-205L, MPE6D-205L, MPRA6E-205L, MPRA6E-147L, MPRA6E-147LC) |
|
| 8 | Impeller, 1-1/2 HP (Models MPEAF-206L, MPE6E-206L, MPRA6F-206L, MPRA6YF-206L) |
|
| 8 | Impeller, 2 HP (Models MPEA6G-207L, MPE6F-207L, MPEA6YG-207L, MPE6YG-207L, MPRA6YG-207) |
|
| 8 | Impeller, 2-1/2 HP (Models MPEAA6G-208L, MPA6G-208L, MPEAA6YG-208L, MPE6G-208L) |
|
| 8A | Gasket Models MPEA6G-207L, MPE6F-207L, MPEA6YG-207L, MPE6YF-207L, MPRA6G-207 |
|
| 8B | Impeller Lock Screw Models MPEA6G-207L, MPE6F-207L, MPEA6YG-207L, MPE6YF-207L, MPRA6G-207 |
|
| 9 | Diffuser - 1/2 HP |
|
| 9 | Diffuser - 1 HP |
|
| 9 | Diffuser - 1-1/2 HP |
|
| 9 | Diffuser - 2 HP |
|
| 9 | Diffuser - 2-1/2 HP |
|
| 10 | Diffuser O-Ring |
|
| 11 | Tank and Trap Body (Only) |
|
| 12 | Trap Cover |
|
| 12 | Trap Cover Assembly |
|
| 13 | Trap Cover, O-Ring |
|
| 14 | Trap basket |
|
| 15A | 1/4" NPT Plug with O-Ring |
|
| 15B | Mounting Screw 5/16-14x5/8” |
|
| 16 | Base - Plastic |
|
| 17 | Motor Pad - for Plastic Base |
|
| 18 | Capscrew, 8-32 x 7/8" Rd. Hd. |
|
| 19 | Lockwasher, #8 Ext. Tooth |
|
| 20 | Flat Washer 3/8” |
|
| 21 | Lockwasher, 3/8" |
|
| 22 | Nut, Hex 3/8 x 16 |
|
| 23 | Cap Screws 3/8-16x1-1/4” Hex. (LS Suffix) |
|
| 24 | Bolt, 3/8 - 16 x 1 in. S.S. Hex Capscrew |
|
| NOT SHOWN | ||
| Item No. | Part No. | Description |
Nameplate |
||
Tag, "CAUTION This pump equipped with mechanical shaft seal..." |
||
Voltage Sticker |
||
CautionTag |
||