Max-E-GlasII/Dura-GlasII Replacement Parts
Replacement Parts
| MAX-E-GLAS II / DURA-GLAS II SERIES REPLACEMENT PARTS | ||
| Item No. | Part No. | Description |
| 2 | Screw |
|
| 2A | Lockwasher |
|
| 3 | Bonding Lug |
|
| 4 | Water Slinger 4 |
|
| 5 | Seal Plate Kit 1, 3 |
|
| 6 | O-Ring |
|
| 7 | Seal 2 |
|
| 7 | Shaft Seal, Viton |
|
| 8 | Clamp Knob |
|
| 9 | V-Clamp |
|
| 10 | Impeller |
|
| 10 A | Impeller Screw (Model C105-238PBA) |
|
| 10 A | Impeller Screw (All models except C105-238PBA) |
|
| 11 | Diffuser – 1 HP & 1-1/ 2 HP |
|
| 11 | Diffuser – 1-3/4 thru 2-1/2 HP |
|
| 12 | Diffuser O-Ring |
|
| 13 | Lockwasher, #8 |
|
| 14 | Capscrew, 8-32 x 7/8" |
|
| 14 | Mach SCR HX HD 8- 32, 5 req. |
|
| 15 | Tank Body Assembly (includes trap cover, O-Ring, Basket) |
|
| 16 | Trap Cover |
|
| 16 | Trap Cover - (Biguanide Resistant) |
|
| 17 | Trap Cover O-Ring |
|
| 18 | Trap Basket |
|
| 19 | 1/4" NPT Plug with O-Ring 1/4 in. NPT w/O-Ring |
|
| 19 | Drain Plug O-Ring |
|
| 20 | Screw, Base |
|
| 21 | Base |
|
| 21 | Base with Motor Pad (3 HP only) |
|
| 22 | Motor Pad |
|
| 23 | Bolt, 3/8 - 16 x 1 in. S.S. |
|
| 23 | Capscrew, Socket Head, 3/ 8-16 x 1" (3 HP only) |
|
| NOT SHOWN | ||
| Item No. | Part No. | Description |
Impeller O-Ring |
||
1: Includes Seal Plate, Shaft Seal and Seal Plate O-Ring.
2: Replaces U109-358SS (effective 6/00).
3: New Seal Plate design. See inset drawing on opposite page for models with Copper Insert, see Figure 5A.
4: Replaces C69-2 (effective 9/00).
5: Requires one Impeller Screw. See Repair Parts list.