Fiberglass Reinforced Polypropylene Tank
Clean & Clear® Plus Filters have a corrosion resistant injection molded filter tank featuring superior strength and reliability. The cartridge assembly uses four easy to clean, non-woven, polyester cartridges. Each filter is supplied with a bulkhead union set for easy installation.
- NSF listed
- Superior strength
- Large filter area for increased dirt capacity
- 1-1/2 in., 100% drain clean-out port
- Continuous High Flow™ internal air relief*
- Base and plumbing kits now available
- Injection molded tank
- Balanced hydraulic flow
- Tension Control™ clamp
- 100% factory tested
- Black bulkhead unions
- High Flow manual air relief valve
CDs, DVDs and Videos
File Size & Type
|Frank Bowman Video on PoolFYI explaning Clean & Clear Plus Filters|
|CLEAN & CLEAR PLUS FILTERS|
|Flow Rate2||Flow Rate3||Turnover Capacity (In Gallons)|
|Product||Model||Effective Filtration Area (Sq. Ft.)||GPM Res.||GPM Comm.||8 Hour||10 Hour||12 Hour||Carton Qty||Carton Wt (Lbs)|
1: NSF Listed.
2: Residential rate one GPM per sq. ft. of filter area.
3: Commercial rate is a maximum of .375 GPM sq. ft. of filter area.
|Clean & Clear Plus Filters|
Troubleshooting & FAQs
|Have a question? Post it in our Discussion Forum. You’ll get answers from Pentair Customer Service, pool professionals and pool owners who can help with troubleshooting and recommendations.|
Note: Actual system flow will depend on plumbing size and other system components.
Note: Pentair Pool Products does not recommend flow rates above 150 GPM.
*Integrated Continuous High Flow internal air relief is operational only when there is unobstructed flow in the circulating system.
Operating Limits - maximum continual operating pressure of 50 PSI. Pool.spa (bather) applications, maximum operating water temperature (internal filter) 104 degrees F (40 degrees C)