IntelliFlo Pump Comparisons
  IntelliFlo VF IntelliFlo VS 3050 IntelliFlo VS+SVRS
Typical Energy Savings Up to 90% 30-90% 30-90%
Automation Networking IntelliTouch, EasyTouch, SunTouch IntelliTouch, EasyTouch, SunTouch IntelliTouch, EasyTouch, SunTouch
Automation Programs 8 Programs 8 Programs 8 Programs
IntelliTouch Options Up to 8 Pumps max of any variety Up to 8 Pumps - max 4 VS+'s Up to 8 Pumps - max 4 VS+'s
EasyTouch Options Up to 2 Pumps (VF or VS) Up to 2 Pumps (VS or VF) Up to 2 Pumps (VF or VS)
SunTouch Options Up to 1 Pump Up to 1 Pump Up to 1 Pump
Program Method Flow* Speed Speed
Safety Dead Head Sensor, Suction Blockage, Cavitation Correction, Voltage Alerts, Current Alerts, Freeze Protection, Max Power Limiter, Over Heating Protection Voltage Alarm, Current Alarm, Freeze Protection, Over Heating Protection SVRS ASME A112.19.17.2002 Certified for Body Suction Entrapment, Dead Head Protection, Voltage Alarm, Current Alarm, Freeze Protection, Speed Limiter, Password Protection, Over Heating Protection
Timer Integral Clock and Timer None Integral Clock and Timer
Features Filter Mode, 7 Timed Cycles, MoFlo, 2 On Demand Features, Vacuum, Backwash, Manual Over Ride, Load Sense Priming 4 Set Speeds 8 Speeds Set by Manual, Egg Timer, or Duration, Load Sense Priming, Service Mode Time Out, Quick Clean Over Ride, Freeze Protection Limiter, Max Speed Limiter, Password Protection
Field Wiring 230/240 Volt 60/50 hertz 230/240 Volt 60/50 hertz 230/240 Volt 60/50 hertz
Motor Permanent Magnet 3.2 KW Permanent Magnet 3.2 KW Permanent Magnet 3.2 KW
Performance Limits Up to 3.2 KW or 172 GPM Up to 3.2 KW from 400 RPM to 3450 RPM Up to 3.2 KW from 1100 RPM to 3450 RPM
LCD Screen Yes No Yes
Agency Marks UL, CUL, CSA, NSF UL, CUL, CSA, NSF UL, CUL, CSA, NSF, ASME A112.19.17.2002
* Pentair's Patented Flow Control allows for the pump to be set to a specific flow rate whereby the pump will then find the specific speed it takes to achieve that flow. This program is spectacular in running your pump at the lowest speed, providing the right flow, and saving the most money in energy cost.
Print | Close Window